ABOUT THE COMPANY

Magna Massiv Die-Form is located in a 350,000 SQFT facility located in Brampton. Designing and building medium to large cast stamping dies, hydroforming dies, and related equipment. Processes include machining (numerically controlled and conventional), assembly, tryout, etc. Capabilities include die design, pattern construction and casting of associated cast iron and cast steel die components.

THE GOAL WAS TO INCREASE LIGHT LEVELS BY 50% WHILE REDUCING ENERGY CONSUMPTION, TO ENSURE A MORE WELL-LIT WORK AREA FOR STAFF.

The main lighting in the plant area consisted of 4-lamp T5, 6-lamp T8, and 8-lamp T5 fixtures mounted at heights from 25ft to 60ft. In addition, the facility contained more than 750 existing high bay fixtures in a uniform layout but was lacking in light output to the shop floor. The goal was to increase their lighting levels by 50%, while reducing their energy consumption, ensuring a more well-lit work area.

Magna reviewed a number of different LED fixtures in the market but ultimately chose RENO's Zenith Linear High Bays. After a sample install of 10 fixtures was completed, it showed how well these fixtures could deliver superior light levels compared to the existing fluorescent fixtures in place. In addition, their facility managers opted to have a microwave dimming sensor installed onto the linear highbays to lower light levels in low-traffic areas within the plant.

175W LINEAR HIGHBAY

Existing 6-lamp T8 fixtures replaced with wattage selectable (up to 175W) linear highbays.

140W LINEAR HIGHBAY

Existing 4-lamp and 8-lamp T5 fixtures replaced with wattage selectable (up to 140W) linear highbays.